Dell Compellent Series 30 User Manual
Page 421
Advertising
413
Configuring a Liebert™ UPS
The Traps window appears.
Figure 329. Traps Section
11 Click Edit.
12 In the Network Name column, enter the following:
•
For a single-controller Storage Center system, enter the controller IP address on the
first unused line.
•
For a dual-controller Storage Center system, enter Management IP address (not the
ETH0 address). To view Storage Center IP addresses, refer to
13 In the Community column, enter Public.
14 Select or clear Heartbeat.
15 Click Save.
To reinitialize
1 In the menu tree on the left side, click Reinitialize.The Reinitialize window appears.
Advertising