Dell Compellent Series 30 - Manual (Page 417)

409
Configuring an APC™ UPS
6 For a single-controller Storage Center, in the Access Control Entry window, enter the
controller IP address in the Access Control Entry window. (Refer to Viewing Controller
Properties on page 144 .)
7 As an Access Type, select Read.
8 Click Apply.
9 Add the actual IP address of the clustered controller (not the management IP address).
Figure 323. Addresses Entered
10 In the Access Control window, select Notification. The Notification window appears.
Figure 324. APC Notification Window
11 In the Notification window, select trap receivers.
The Trap Receivers window appears.