Replacing the sas controller card battery – Dell POWEREDGE 840 User Manual
Page 75
Advertising
Installing System Components
75
Replacing the SAS Controller Card Battery
1 Disconnect the battery cable from the SAS controller card.
Figure 3-20.
Replacing the SAS Controller Card Battery
2 Remove the battery and battery holder from the system chassis. See Figure 3-20.
3 Insert the new battery into the battery bay, ensuring that the battery is aligned and fully seated into the
slots.
4 Connect the battery cable to the SAS controller card.
1
chassis notches
2
battery/battery holder
1
2
Advertising