Dell Compellent Series 30 - Manual (Page 25)

19
Configuring a System via the Startup Wizard
Figure 13. Configure SMTP
1 Enter the following:
• SMTP Mail Server: IP address or fully qualified domain name of the SMTP email
server. Use the Test server link to verify connectivity to your SMTP server.
• Sender E-mail Address: Email address of the sender in the Sender E-mail Address
box. This address is required by most SMTP servers and is used as the resulting
email's MAIL FROM address.
2 Click on one of the following to proceed:
• Continue to save the SMTP configuration and continue the initial system setup
process.
• Advanced to configure additional SMTP settings.