Drive panel, Removing the drive panel – Dell XPS 700 Jet Black User Manual
Page 102
104
Removing and Installing Parts
9 Replace the computer cover (see "Replacing the Computer Cover" on page 125).
NOTICE:
To connect a network cable, first plug the cable into the network port or device and then plug it into the
computer.
10 Connect the computer and devices to electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software required for
drive operation.
Drive Panel
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product
Information Guide.
Removing the Drive Panel
1 Follow the procedures in "Before You Begin" on page 75.
2 Remove the
computer cover (see "Removing the Computer Cover" on page 76).
1
power cable
2
data cable
1
2
book.book Page 104 Thursday, July 20, 2006 11:10 AM