Drives – Dell XPS 700 Jet Black User Manual
Page 95
Removing and Installing Parts
97
If you installed an add-in network adapter and want to disable the integrated network adapter:
1 Enter system setup (see "Entering System Setup" on page 132), select Integrated NIC Controller, and
then change the setting to Off.
2 Connect the network cable to the add-in network adapter connectors. Do not connect the network
cable to the integrated connector on the back panel.
If you removed an add-in network connector:
1 Enter system setup (see "Entering System Setup" on page 132), select Integrated NIC Controller, and
then change the setting to On.
2 Connect the network cable to the integrated connector on the back panel of the computer.
Drives
Your computer supports:
•
Six SATA devices (hard drives or optical drives)
•
Two IDE devices (two hard drives or two optical drives)
•
One floppy drive
•
One Media Card Reader
NOTICE:
When removing and replacing drives, be sure to leave the drive data and power cables connected to the
system board.
NOTE:
The 5.25-inch Media Card Reader/floppy drive carrier is not interchangeable with the hard drive carrier.
book.book Page 97 Thursday, July 20, 2006 11:10 AM