Cub Cadet SC2400 - Manual (Page 120)

15-6
15. SERVICING THE ELECTRICAL SYSTEM
Sc2400 Operator’s Manual
IMPORTANT: Avoid damage.
●Use of a fuse other than a correctly rated one may
cause damage to the electrical system. Replace
the blown fuse with a new fuse of the same
amperage rating.
■ Replacing the Accessory Fuses
1. Park the tractor safely and securely.
2. Open the rear grille screen.
3. Grip both ends of the fuse holder cover and
remove.
4. Locate the fuses by referring to the diagram at the
right.
5. Remove the blown fuse from its socket.
6. Push the new fuse into the socket.
7. Reinstall the fuse holder cover.
8. Close the rear grille screen.
(A) Fuse holder cover
(1) PTO fuse: 5A
(2) Meter panel fuse: 5A
(3) Start relay fuse: 25A
(4) DC outlet fuse: 10A
(5) Warning light fuse: 15A
(6) Work light fuse: 10A
(7) Head light fuse: 15A
(8) Fuel pump fuse: 5A
■ Checking the Alternator Fuse and the
Main Fuse
1. Park the tractor safely and securely.
2. Open the hood.
3. Locate the fuses by referring to the picture at the
right.
4. Check the fuses.
IMPORTANT: Avoid damage.
●The alternator fuse and the main fuse are of slow
blow type. When any of these fuses has been
blown, contact your local Cub Cadet Yanmar
dealer.
(A) Alternator fuse: 60A
(B) Main fuse: 60A
2. Fuses
P3014934
(A)
WA
15A
WL
10A
HL
15A
PTO
5A
F.PUMP
㪪㪧㪘㪩㪜
㪈㪇㪘
㪧㪬㪣㪣㪜㪩
㪪㪧㪘㪩㪜
㪉㪌㪘
5A
㪪㪧㪘㪩㪜
㪈㪌㪘
START
OUTLET
10A
㪪㪧㪘㪩㪜
㪌㪘
METER
5A
25A
1A7880-65780
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
P3014949
(A)
(B)