Cub Cadet SC2400 - Manual (Page 47)

8-5
8. OPERATING THE TRACTOR
Sc2400 Operator’s Manual
5. Adjust the throttle control lever to
attain an intended speed.
■ Throttle Control Lever
Use the throttle control lever to change the engine
speed. While monitoring the tachometer, change the
engine speed as required.
(A) Throttle control lever
(a) To increase the engine speed:
pull the throttle control lever backward.
(b) To decrease the engine speed:
push the throttle control lever forward.
6. Raise the implement.
1. Pull the 3-point hitch control / cutting height
adjustment lever rearward and raise the mid- or
rear- mounted implement to the raised position.
(A) 3-point hitch control / cutting height
adjustment lever
(a) Raised position
2. If the tractor has any implements (ex. front loader)
that use the implement control valve, pull up the
implement lock lever to release locking and use
the implement control lever to raise the
implement.
(A) Implement lock lever
(B) Implement control lever
(a) Raising the implement
(b) Unlocking
(c) Locking
3014903e
(A)
(b)
(a)
3014918d
(A)
(a)
3014903d
(A)
(B)
(a)
(b)
(c)