Cub Cadet SC2400 - Manual (Page 51)

8-9
8. OPERATING THE TRACTOR
Sc2400 Operator’s Manual
■ Applying the Parking Brake
Avoid injury:
●ALWAYS engage the parking brake securely
before leaving the tractor unattended.
1. Turn off the Power Take OFF (PTO) switch.
(A) Power Take Off (PTO) switch
2. Lower the implement to the ground, set the
implement control lever to the NEUTRAL position
and push in the implement lock lever to lock.
3. Engage the parking brake securely.
4. Turn the key to the OFF position.
5. Remove the key from the starter key switch.
6. Remove foot from the brake pedal. Make sure
that the parking brake has been fully engaged.
7. Before leaving the tractor, be fully sure that the
tractor is at a standstill.
(A) Implement control lever
(B) Implement lock lever
(C) Parking brake lever
(D) Brake pedal
IMPORTANT:
●NEVER park on a steep slope. ALWAYS park on a
solid, flat, level ground whenever possible. If
parking on a slope is unavoidable, park the tractor
across the slope, and lower the implement to the
ground.
■ Releasing the Parking Brake
1. Fully depress the brake pedal.
2. Fully push the parking brake lever forward to
unlock the parking brake.
3. Remove foot from the brake pedal. Make sure
that the brake pedal is unlocked.
4. Parking the Tractor
CAUTION
3014919b
(A)
3014903j
(B)
(A)
(C) (D)