Checking the radiator hoses and clamps, Cleaning the radiator cooling fins and screen, Never allow bystanders near the tractor – Cub Cadet SC2400 User Manual

Page 85: Reduce compressed air pressure to 30 psi (210 kpa), Checking the radiator hoses and clamps -7, Cleaning the radiator cooling fins and screen -7, Warning caution caution

Advertising
background image

14-7

14. PERIODIC SERVICE

Sc2400 Operator’s Manual

Checking the Radiator Hoses and Clamps

ALWAYS stop the engine, allow it to cool and

remove the key from the starter key switch
before checking the radiator hoses and clamps.

1. Park the tractor safely and securely.
2. Open the hood.

NOTE:
●Visually check the hoses for cracks and wear.

Squeeze the hoses to check for evidences of
deterioration. Hoses should not be hard and brittle
nor soft or swollen.

3. Check the upper radiator hose for any damage

including cracking. Replace the damaged hose.

4. Check the hose clamps as necessary.
5. Check the lower radiator hose for any damage

including cracking. Replace the damaged hose.

6. Check the hose clamps as necessary.
7. Close the hood.

(A) Upper radiator hose
(B) Hose clamps
(C) Lower radiator hose

Cleaning the Radiator Cooling Fins and Screen

ALWAYS stop the engine and remove the key

from the starter key switch before cleaning the
radiator cooling fins and screen.

Avoid injury. Compressed air can cause debris
and dirt to powerfully fly a long distance:
NEVER allow bystanders near the tractor.
When using compressed air for cleaning,

ALWAYS ensure adequate air inflow to prevent
engine overheating, or wear protective
goggles.

Reduce compressed air pressure to 30 psi

(210 kPa).

WARNING

CAUTION

CAUTION

P3014915

(B)

(A)

(B)

P3014916

(B)

(C)

(B)

Advertising