Operation of the tractor, Turn signals, Headlights / work lights – Cub Cadet SC2400 User Manual
Page 45: Hazard lights, Operation of the tractor -3, Turn signals -3, Headlights / work lights -3, Hazard lights -3, Operation of the tractor caution
Sc2400 Operator’s Manual
Avoid injury:
●Before starting or operating the tractor, always
check the area around the tractor for obstacles
and any person nearby. Turn off the Power
Take Off (PTO) switch and raise the implement.
IMPORTANT: Avoid damage.
●To prevent damage to the transmission, stop the
tractor completely before shifting the range shift
lever.
1. Sit on the seat.
For the adjusting method of the seat position, refer to
“Adjusting the Operator's Seat” on page P7-2, and
for the fastening method of the seat belt, refer to
“Fastening the Retractable Seat Belt” on page P7-2.
2. Use the turn signal switch, headlight /
work light switch, hazard lights button
switch as necessary.
■ Turn Signals
(A) Turn signal switch
(a) Move the turn signal switch to the left to signal a
left turn of the tractor.
(b) Move the turn signal switch to the right to signal a
right turn of the tractor.
■ Headlights / Work Lights
(A) Headlight / work light switch
(a) OFF
(b) Turning the blue lever to (b) position illuminates
the headlights.
(c) Turning the blue lever to (c) position illuminates
the headlights and work lights at the same time.
■ Hazard Lights
Pushing the hazard lights button switch will cause
the hazard lights to flash.
(A) Hazard lights button switch
2. Operation of the Tractor
CAUTION
(A)
A3014902
(a)
(b)
A3014901
(a)
(b)
(c)
(A)
A3014901f
(A)