Qmark TBX - Tool Box Heater User Manual

Installation & maintenance instructions, Portable industrial electric forced air heater, Save these instructions

Advertising
background image

TBX104 & TBX754

PORTABLE INDUSTRIAL

ELECTRIC FORCED AIR

HEATER

CAUTION - TO REDUCE RISK OF FIRE AND ELECTRIC
SHOCK OR INJURY TO PERSONS, OBSERVE THE
FOLLOWING:

1. Read all instructions before using this heater.

2. This heater is hot when in use. To avoid burns, do not let

bare skin touch hot surfaces. If provided, use handles when
moving this heater. Keep combustible materials, such as
furniture, pillows, bedding, papers, clothes, and curtains at
least 3 feet (0.9m) from the front of the heater and keep
them away from the sides and rear.

3. Extreme caution is necessary when any heater is used by or

near children or invalids and whenever the heater is left
operating and unattended.

4. Always unplug heater when not in use.

5. Do not operate any heater with a damaged cord or plug or

after the heater malfunctions, had been dropped, or dam-
aged in any manner. Return heater to authorized service
facility for examination, electrical or mechanical adjustment,
or repair.

6. Do not use outdoors.

7. This heater is not intended for use in bathrooms, laundry

areas and similar indoor locations. Never locate heater
where it may fall into a bathtub or other water container.

8. Do not run cord under carpeting. Do not cover cord with

throw rugs, runners, or the like. Arrange cord away from
traffic area and where it will not be tripped over.

9. To disconnect heater, turn controls off, then remove plug

from outlet.

10. Connect to properly grounded outlets only.

11. Do not insert or allow foreign objects to enter any ventilation

or exhaust opening as this may cause an electric shock or
fire, or damage the heater.

12. To prevent a possible fire, do not block air intakes or

exhaust in any manner. Do not use on soft surfaces, like a
bed, where openings may become blocked.

13. A heater has hot and arcing or sparking parts inside. Do not

use it in areas where gasoline, paint, or flammable liquids
are used or stored.

14. Use this heater only as described in this manual. Any other

use not recommended by the manufacturer may cause fire,
electric shock, or injury to persons.

15. The heater is not intended for use with an extension cord.

16. Save these instructions

Installation & Maintenance Instructions

SAVE THESE INSTRUCTIONS

WARNING

!

Dear Owner,

Congratulations! Thank you for purchasing this new heater manufactured by Marley Engineered Products.
You have made a wise investment selecting the highest quality product in the heating industry.
Please carefully read the installation and maintenance instructions shown in this manual. You should enjoy
years of efficient heating comfort with this product from Marley Engineered Products... the industry’s leader in
design, manufacturing, quality and service.

... The Employees of
Marley Engineered Products

18.5”

23.5”

17.7”

25”

28.5”

37.5”

Advertising