Editing the cd for recording, 1 press program, 4 press program – Sony MHC-3500 User Manual
Page 68: 6 press ii on the remote commander, 8 press cd synchro and pause on the cassette deck, Ize3z1i
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
10
3 1 1 4
a
IZE3Z1I
10
Editing the CD
for Recording
To record the desired selections on
the front side___________________
Before pressing EDIT, program the desired
selection. (See page 28.)
How the CD player determines the
seiections [g____________________
The CD player selects the selections from
the first one in the CD, summing up each
playing time. When the total playing time
exceeds the specified tape length, the last
selection is eliminated. Then, the CD player
looks for a selection whose length is within
the remaining tape and substitutes it for the
eliminated one.
mm
. « J . - r •
Programing Selections while
Checking the Total Playing
Time—Program Edit
You can adjust the total playing time to the
tape duration.
1
Press PROGRAM.
“PROGRAM" appears in the display.
2
Choose the desired selection to be
programmed
with
or
and
check the time.
3
If satisfactory, go to the next step. If
not, repeat step 2 and choose another
selection
4
Press PROGRAM.
5
Repeat steps 2 to 4 to program the
desired selections for side A.
“A” remains lit.
6 Press II on the remote commander.
"P" appears in the display and the total
playing time is reset to 0.
' “B” lights up.
7
Rep6at steps 2 to 4 to program the
desired selections for side B.
8 Press CD SYNCHRO and PAUSE on
the cassette deck.
The CD play and recording start
simultaneously.
68