Sony MHC-F100 - Manual (Page 17)

To listen to non-preset radio
stations
Press TUNING MODE repeatedly until
"MANUAL” or "AUTO” appears in step
2,
then tune in the station by turning the jog
dial.
Tips
• Pressing TUNER/BAND when the power is off
automatically turns the power on and tunes to the
last received station (One Touch Play).
• You can switch from another source to the radio
just by pressing TUNER/BAND (Automatic
Source Selection).
• When an FM program is noisy, press
STEREO/MONO repeatedly until "MONO"
appears in the display. There will be no stereo
effect, but the reception will improve. Press the
button again to restore the stereo effect.
• To improve broadcast reception, reorient the
supplied antennas.
Recording from the
radio
You can record the radio program on a tape
by calling up a preset station. You can use
TYPE 1 (normal) or TYPE II (CrQz) tapes. The
recording level is automatically adjusted.
POWER DOLBY NR DSTOP
1 4
1
Press TUNER / BAND repeatedly
until the band you want appears.
2
Press TUNING MODE repeatedly
until "PRESET" appears.
3
Turn the jog dial to tune in the
desired preset station.
S'
o
?
3
t*
o
3
HI
Turn counter­
clockwise for
lower preset
numbers.
Turn clockwise
for higher
preset numbers.
Preset number Frequency
„ F M ’ 3 ' ' 1 0 4 . 0 0 « ^
continued
t7