Sony MHC-F100 - Manual (Page 24)

4
To program a whole disc, skip this
step. Press KW / C>C>il until the
desired track number appears.
When the disc you select has a disc title
(For MHC-FIOO/MHC-FRI only), it
appears and then switches to the
following display.
Programming the CD tracks
(continued)
2 0
+
Track number
5
Press ENTER.
The track is programmed.
The programmed track
¿0, J
.20. .r d.
The programmed Playing order
disc
6
To program other discs / tracks, do
the following;
To program Repeat Steps
Other discs 3 and 5
Other tracks on other discs 3 to 5
To You need to
Check the
program
Press CHECK repeatedly.
After the last track, "END"
appears.
Clear a specific
track or disc Press CHECK until the track
or disc you do not want
appears, then press CLEAR.
Clear from the
last track or disc Press CLEAR. Each time you
press the button, the last track
or disc will be cleared.
Add tracks or
discs to the end
of the program Follow the programming
procedure.
Clear a specific
program 1 Press PROGRAM repeatedly
until the program number
you want to clear appears.
2 Hold down CLEAR until
"ALL CLEAR" appears.
Tips
• when you press CD >tlD, you can play the same
program again.
• If you replace discs, the programmed disc and
track numbers remain until you erase them. So,
the player plays only the existing disc and track
numbers. However, the disc and track numbers
that are not found in the player or on the disc are
deleted from the program, and the rest of the
program is played in the programmed order.
Other tracks on the same disc 4 and 5
7
Press CD WIO.
All the tracks play in the order you
selected.
To cancel Program Play
Press CONTINUE.
24