Sony MHC-F100 - Manual (Page 31)

Recording a CD by
specifying track order
You can record tracks from all the CDs in the
order you want. When programming, make
sure the playing times for each side do not-
exceed the length of the tape.
1
Insert a blank tape into deck B.
i2 Press FUNCTION repeatedly until
"CD” appears.
3
Press PROGRAM repeatedly until
the program number (PROGRAM 1,
2 or 3) appears.
4
Turn the jog dial until the disc
number you want appears.
5
To program a whole disc, skip) this
step.
Press 0<K] / ООН until the desired
track appears in the display.
Total playing time
Disc number (including selected track)
cj2
г ^ 2 . 4 3
Track number
6
Press ENTER or PROGRAM.
The track is programmed.
To program Repeat Steps
Other discs 4 and 6
Other tracks on the same disc 5 and 6
Other tracks on other discs 4 to 6
7
To program additional tracks to be
recorded, repeat steps 4 to 6.
Skip step 4 to select tracks from the same
disc.
8
Press CD SYNCHRO.
Deck B stands by for recording and the
CD player stands by for playback. O
(for front side) lights up.
9
Press DIRECTION repeatedly to
select to record on one side.
Select CZ2.3 (or RELAY) to record on
both sides.
10
Press PAUSE 01
Recording starts.
continued
31