To change the equalizer display, Adjusting the audio emphasis, Adjusting the graphic equalizer – Sony MHC-F100 User Manual
Page 36
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Selecting the audio em phasis
(continued)
To change the equalizer display
Each time you press SPECTRUM
ANALYZER, the equalizer display changes to
show one of the three displays below.
Spectrum analyzer pattern 1
■ ■ a _ _ ■ 1 ■ ■ ■ 11
Spectrum analyzer pattern 2
------- --
Graphic
O'
equalizer curve
29^
- — _____ _ — -
Adjusting the audio
emphasis
You can adjust the audio emphasis using the
graphic equalizer and surround effect.
To enjoy the sound with the adjusted
equalizer and surround effect at the
sametime, do the procedure "Adjusting the
graphic equalizer" first.
Adjusting the graphic
equalizer
You can adjust the sound by raising or
lowering the levels of specific frequency
ranges.
Before operation, first select the audio
emphasis you want for your basic sound.
1
Select the audio emphasis you want
for your basic sound (see "Selecting
the audio emphasis").
2
Press GEQ FILE on the unit
repeatedly until the graphic
equalizer appears.
3
Press+/-repeatedly to select a
frequency band.
¿0, -
1 k H z
36