Sony MHC-F100 - Manual (Page 48)

Specifications
For the U.S. model
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
With 8 ohm loads (6 ohms loads for
MHC-F50), both channels driven, from 70 -
20,000 Hz; rated 100 watts (50 watts for
MHC-F50) per channel minimum RMS
power, with no more than 0.9% total
harmonic distortion from 250 milliwatts to
rated output.
Amplifier section
Continuous RMS power output
Canadian model
100 + 100 watts
(8 ohms at 1 kHz,
5% THD) {for MHC-FIOO)
60 + 60 watts
(6 ohms at 1 kHz,
5% THD) (for MHC-F50)
Other models 100 + 100 watts
(8 ohms at 1 kHz,
10% THD)
Peak music power output (except for U.S. and
Canadian models):
1400 watts
CD player section
System
Inputs
Outputs
VIDEO/MD IN (phono
jacks); voltage 250 mV,
impedance 47 kilohms
MIX MIC (phone jack)
(for Singaporian model
only): sensitivity 1 mV,
impedance 10 kilohms
VIDEO/MD OUT (phono
jacks): voltage 250 mV
impedance 1 kilohms
PHONES (stereo phone
jack): accepts headphones
of 8 ohms or more.
SPEAKER: accepts
impedance of 8 to 16
ohms (for MHC-FIOO/
MHC-FRl only)
accepts impedance of 6 to
16 ohms (other models)
SURROUND SPEAKER
(for MHC-FIOO/MHC-
FRl only):
accepts impedance of 16
ohms.
SUPER WOOFER (for
MHC-FIOO/MHC-FRI
ordy): Voltage 1 V,
impedance 1 kilo ohm
Laser
Laser output
Wavelength
Compact disc and digital
audio system
Semiconductor laser
(X=780nm)
Emission duration:
continuous
Max. 44.6 ^W*
*This output is the value
measured at a distance of
200 mm from the
objective lens surface on
the Optical Pick-up Block
with 7 mm aperture.
780 - 790 nm
CD OPTICAL DIGITAL OUT
(Square optical connector jack, rear panel)
(for MHC-FIOO/MHC'FRI only)
Wavelength
600 nm
Tape player section
Recording system 4-track 2-channel stereo
60 - 13,000 Hz (±3 dB),
using Sony TYPE I
cassette
60-14,000 Hz (±3 dB),
using Sony TYPE II
cassette
±0.157« W.Peak (lEC)
0.17o W.RMS (NAB)
±0.27o W.Peak (DIN)
Frequency response
(DOLBY NR OFF)
Wow and flutter
48