Sony PCG-748 User Manual
Page 100
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Notes on Use
To install a memory module
1
Shut down your computer and disconnect all peripheral devices,
such as your printer.
2 Unplug your computer and remove the battery packs.
3
Wait until the computer cools down. Then turn your computer
upside down and open the cover on the bottom.
Q] Slide the memory module into the slot.
UJ The connecwt'i snap into place when the board is cofiectlj seated.
6 Close the cover and tighten the screws.
7
Turn on the computer.
8 Click the My Computer icon with the right button and select
Properties.
The System Properties screen appears.
9
Click the Performance tab to view memory.
Advertising