Sony PCG-748 - Manual (Page 73)

VAIO Notebook Computer User Guide
Notebook Setup Tabs
Tab Descriptions
About This Computer Display system information, including memory
capacity, serial number, and BIOS version.
Infrared Change the infrared communication settings
depending on the infrared equipment your
computer is using to communicate.
Printer/FDD Switch between connecting a printer or floppy disk
drive without turning off the power. Change printer
port mode settings.
Power On
Device Sequence Select the order of drives and devices from which
you want to load the operating system. You can
specify the hard drive Inserted into the docking
station as well as other drives Inserted into your
computer.
Touchpad When you connect an optional mouse to the Serial
port of your computer, you can make your touchpad
Inactive. You can also customize the settings of your
mouse using the mouse utility.
Power On Password Set the password to secure your computer.
Enable Ports Change the hardware resources such as I/O
address, IRQ, or DMA depending on the optional
hardware or software you use. Disabling ports
releases resources to the system. To change the
serial, audio, and modem settings, click Advanced
on the Bcislc/Advanced tab.
Basic/Advanced Toggle between Advanced mode (additional screens
with advanced settings) and Basic mode of display.
Advanced mode includes Sericil, Audio, Built-in
Modem, Enable Ports, and View Resources tabs.
For more information about each option, ciick Help on the Sony Notebook Setup screen to
display the heip fiie.