Using the floppy disk drive – Sony PCG-748 User Manual
Page 32
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using the Floppy Disk Drive
There are two ways to connect the floppy disk drive to your computer:
□ Externally, by connecting it to the computer’s FDD/Printer
connector.
□ Internally, by inserting it into the drive bay.
The computer comes with the CD-ROM drive in the drive bay. If you
want to use both the CD-ROM and the floppy disk drive at the same time,
use the floppy disk drive as an external drive.
If you connect the floppy disk drive externally while your computer is on,
use the Sony Notebook Setup utility to select Floppy Disk Drive. See
“Displaying the Sony Notebook Setup Screen” on page 63 for details.
To connect the floppy disk drive externally
□ Connect the floppy disk drive to the 0 / iC>i FDD/Printer connector
using the external floppy disk drive cable.
The floppy disk drive cable is not supplied. You can purchase this cable separately or
insert the floppy disk drive into the drive bay as described later in this section.
Using Your Notebook Computer