Tips, Playing a cd (continued), The play mode for cd – Sony DHC-MDX10 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Playing a CD (continued)
To
Do this
Stop play
Press ■.
Pause
Press CD ►!! (II on the
remote). Press again to resume
play.
Select a track
During play or pause, turn the
jog dial clockwise (to go
forward) or counterclockwise
(to go back) and release it when
you reach the desired track. (Or
press (to go forward) or
(to go back) on the
remote.)
Find a point in
Press and hold down ►► or
a track
◄◄ during play and release it
at the desired point.
Select a CD
Press a DISC 1~3 button or
in stop mode
DISC SKIP/EX-CHANGE.
Play only the
CD you have
selected
Press PLAY MODE repeatedly
until "f" or "aC or
appears.
Play all CDs
Press PLAY MODE repeatedly
until or or X£'
appears.
Remove the CD
Press =.
Exchange other
CDs while
Press DISC SKIP/
EX-CHANGE.
playing
Adjust the
volume
Turn VOLUME (or press
VOL +/ - on the remote).
Each time you press PLAY MODE, the play
mode for CD changes as follows;
The play mode for CD
• All Discs Normal Play (It plays all the
CDs in the player. or
"(m " lights in the display.)
or
One Disc Normal Play (The selected track
whose DISC indicator lights green is
played.)
All Discs Shuffle Mode (It shuffles all the
CDs in the player. "SHUFFLE" and
or or "(a" lights in the display.)
O'
One Disc Shuffle Mode (It shuffles all
titles in the CD whose DISC indicator
lights green.)
4-
__Program mode (It plays the programmed
tracks.)
Tips
• Pressing CD ►II when the power is off
automatically turns the power on and starts CD
playback if there is a CD in the tray (One Touch
Play). When the system is in the Power Saving
Mode, the One Touch Play function does not
work.
• You can switch from another source to the CD
player and start playing a CD just by pressing
CD ►!! or the'DISC 1~3 buttons (Automatic
Source Selection).
• If there is no CD in the player, "CD No Disc"
appears in the display.
• When a disc tray holding a CD is selected (or
playing), the DISC 1~3 button for that tray lights
green. When a disc tray holding a CD is not
selected, the DISC 1~3 button for that tray lights
orange. When all disc trays are empty, the DISC
1~3 buttons all light green.
12