Sony DHC-MDX10 - Manual (Page 33)

4 To programme additional tracks,
repeat step 3.
Each time you programme, the total time
of the programmes is displayed. You can
make a programme of up to 25 tracks.
5
Press MD ►!!.
All the tracks play in the order you
selected.
To cancel Programme Play
while the deck is stopped, press PLAY
MODE repeatedly until "SHUFFLE" and
"PROGRAM" disappear.
To change the programme
You can change the programme before you
start playback.
To Do this
Clear a track from
the end Press CLEAR while MD is
stopped.
Clear the entire
programme Press CLEAR repeatedly
while MD is stopped until
the entire program is erased.
Add a track to
the programme Do steps 3.
Check the order
of programmed
tracks Turn the jog dial (or press
►W or on the remote)
while playing an MD.
Check the total
number of
program tracks Press DISPLAY in the stop
mode. The total program
steps appear, follow by the
last program track number
and the total playing time.
Tips
• The programme you made remains after
Programme Play finishes. To play the same
programme again, press MD ►II.
• If you try to add more than the maximum number
of the programme, "ProgramFull!" appears. Erase
unnecessary tracks and programme again.
Playing the MD
tracks repeatedly
— Repeat Play
You can repeat a MD in normal play. Shuffle
Play and Programme Play.
l/(i)
(Power)
1
Press FUNCTION repeatedly until
"MD" appears in the display.
2
Press REPEAT during playback
until "REPEAT" appears.
Repeat play starts according to the
current status of playmode.
To repeat only one track, press REPEAT
again to display "REPEAT 1".
To cancel Repeat Play
Press REPEAT until "REPEAT" and
"REPEAT 1" disappear.
V)
r*
9
3
Hi!
3
(fi
I*
o
B)
3
S
o
33