Recording a cd, To stop recording, To add the surround effect – Sony MHC-331 User Manual
Page 15: Recording a cd: selecting tape length, Automatically (tape select edit)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Recording a CD
You can record from a CD to a tape.
Use TTPE I (normal) or TYPE II (Cr02)
tapes. Do not use TYPE IV (metal) tapes for
recording.
To listen to other sources while recording,
you must stop recording.
7
Press !>D0 on the CD player.
The CD starts playing.
1
Press and insert a blank tape into
deck B with the side you want to record
on facing forward.
Recording will start from the front side
of the tape.
Make sure the tabs on the cassette have
not been removed.
2
Press â OPEN/CLOSE and place a CD.
Then, press Ê OPEN/CLOSE again to
close the disc tray.
3
Press FUNCTION to select the CD
player.
If the button for the disc tray containing
the CD you want to record is not lit
green, press DISC SKIP EX-CHANGE
repeatedly so that it lights green.
4 When you want to reduce the hiss noise
in low-level high-frequency signals,
press DOLBY NR so that "DOLBY NR
B" appears in the display.
5
Press II and then press • (O- is lirü<ed
and depressed at the same time) on deck
B.
Be sure to.press the button firmly and
swiftly.
Deck B stands by for recording.
6 Press II on deck B again to release
recording pause.
Recording starts.
To
Press
Stop recording
■± on deck
Pause recording
II
Stop CD play
■ on the CD player
Pause CD play
>1ID on the CD player
To stop recording
Press on deck B or ■ on the CD player.
To add the surround effect
Press SURROUND so that "SUR iitii«iiiii"
appears in the display.
You can record the sound with surround
effect. The equalizer you adjusted will not
be recorded.
Recording a CD:
Selecting Tape
Length
Automatically
(tape select edit)
You can have the stereo system select and
indicate the most suitable tape length for
recording each disc automatically.
You cannot use Tape Select Edit for discs
which contain 21 tracks or more.
1
Press FUNCTION repeatedly until "CD"
appears in the display.
2
Press â OPEN/CLOSE and place a CD.
Then, press â OPEN / CLOSE again to
close the disc tray.
If the button for the disc tray containing
the CD you want to record is not lit
green, press DISC SKIP EX-CHANGE
repeatedly so that it lights green.
3
Press EDIT repeatedly until "TAPE
SELECT" appears in the display and the
player divides the selections
automatically.
Then the display changes as follows;
•eut»
T R P E
5
Is
♦
Tape length required
...
T R P E
-r -
I
s 6 ~
4 Insert a blank tape of the indicated
length (or longer) into deck B.
5
Press II and then press # (C=*- is linked
and depressed at the same time) on deck
B.
Be sure to press the button firmly and
swiftly.
Deck B stands by for recording.
6 Press II on deck B again to release
recording pause.
Recording starts.
7
Press OHIO on the CD player.
The determined tracks for side A starts
playing and are recorded. After those
tracks have been recorded, the unit will
pause.
8
Set the tape to the beginning of side B.
Take the tape out and insert the tape
with side B facing forward.
9
Press II and then press • (C>- is linked
and depressed at the same time) on deck
B.
Be sure to press the button firmly and
swiftly.
Deck B stands by for recording.
10
Press II on deck B again to release
recording pause.
Recording starts.
1 1
Press >0fl on the CD player.
The determined tracks for side B starts
playing and are recorded.
Chapter 4: the Tape Player
1 5