Specifications, Cd player section, Tuner section – Sony MHC-331 User Manual

Page 26: Tape player section, Speaker, Supplied accessories, General, Index to parts and controls, For the u.s. model audio power specifications, Front panel

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Specifications

For the U.S. model

AUDIO POWER
SPECIFICATIONS

POWER OUTPUT AND
TOTAL HARMONIC
DISTORTION;
With 6 ohm loads, both

channels driven, from 40 - 20

kHz; rated 20 watts per
channel minimum RÌMS
power, with no more than 10

% total harmonic
distortion.

CD player section
System

Compact disc and digitai

audio system

Laser

Semiconductor User

Laser output Max. 44.6^W*

* This output is the value

measured at a distance of
200 mm from the
objective lens surface on
the Optical Pick-up Block

with 7

mm

aperture.

Wavelength 780 - 790 nm

Tuner section
FM stereo, FM / AM superheterodyne
tuner

FM tuner section

Tuning range 87.5 -108.0 MHz

(100 kHz step)

Antenna FM lead antenna
Antenna terminals

' 75 ohm unbalanced

Intermediate frequency

10.7 MHz

AM tuner section

Tuning range 531 -1,710 kHz (with the

tuning interval

set

at 9 kHz)

530 - L710 kHz
(with the tuning interval set
at 10 kHz)

Antenna

AM loop antenna, -

External antenna terminals

Intermediate frequency

450 kHz

Amplifier section
Continuous RMS power output

20 W + 20 W (6 ohms at
1 kHz, 5% THD)

Inputs

VIDEO /100 CD IN (phono jacks):

voltage 450 mV,
impedance 47 kilohms

Outputs

PHONES (stereo phone jack):

accepts headphones of
8 ohms or more.

SPEAKER:

accepts impedance of 6 to
16 ohms.

SUPER WOOFER:

Voltage 1 V, impedance

1 kilohms

Tape player section
Recording system

4-track 2-charmel stereo

Frequency response

(DOLBY NR OFF)
60 - 13,000 Hz (±3 dB),
using Sony TYPE I cassette
60 -14,000 Hz (±3 dB),
using Sony TYPE II cassette

Wow and flutter

±0.15% W. Peak (lEC)
0.1% W. RMS (NAB)
±0.2% W. Peak (DIN)

Speaker
SS-H557
Speaker system 2-way system/

bass-reflex type

Speaker units

Woofer:

15 cm dia., cone type

Tweeter: 5 cm dia., cone type

Nominal impedance

6 ohms

Dimensions Approx. 195 x 325 x

275 mm

( 7 y * x l l ' / ^ x

10^/8in) (w/h/d)

Mass

Approx. 3.5 kg {7 lb 11 oz)
per speaker

Supplied accessories

AM loop anterma (I)
Remote RM-SCIOOP (1)
Sony SUM-3 (NS) batteries (2)

FM lead antenna (1)

General
Power requirements

120 V AC, 60 Hz

Power consumption

U.S. model: 60 W
Canadian model: 70 W

Dimensions Approx. 280 x 325 x

360 mm

(11 V8xl2Vf>il4 7^ in)
(w/h/d)
incl. projecting parts and
controls

Mass

Approx. 7 kg (15 lb 7 oz)

Design and specifications are subject to
change without notice.

index to Parts and
Controls

Refer to the pages indicated in parentheses
for details on how to use the controls.
Controls with an asterisk have indicators
on themselves.

Front Panel

m DISC SKIP EX-CHANGE button* (7)
[2] LOOP button (11)
[3] POWER button (7)

[

4

] Disc tray (7)

[

5

] TIMER button (21)

m PHONES jack (19)
[

7

] DISPLAY/DEMO button (5)

[H SURROUND button (19)
[D MENU 1 - 3 buttons (19)
0lDISCl-3buttons*(7)
ini - OPEN/CLOSE button (7)
liH □ (stop) button (7)
55 wo (play/pause) button* (7)
SAPPILE button (20)
51

EFFECT ON/OFF button* (19)

51TIMER/BAND button (12)
521 FUNCTION button (7)

51

CLIP A - C buttons (10)

51 CLIP ERASE button (10)
^ CLIP PLAY button (10)
U DOLBY NR button (14)

^ MULTI FUNCTION CONTROL buttons

(27)

M

Deck A (14)

26

I

Your Information

Advertising