A use this hookup if you're using, Antenna hookup, Hookup 3 – Sony SLV-640HF User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Hookup 3
Make the following connections if you're using an antenna (if you don't
have cable TV).
Antenna hookup
A Use this hookup if you're using:
• VHF/UHF antenna (you get channels 2-13 and channels 14 and higher)
• UFlF-only antenna (you get channels 14 and higher)
• separate VHF and UHF antennas
Rear of TV
VHF/UHF
A
VHF
HI I* *®
-CO--®
or
Match the type of
connector on your
TV: A, B, or C.
UHF
B Use this hookup if you're using a VHF-only antenna (you get channels 2-13 only)
Rear of TV
VHF/UHF
Q *
VHF
UHF
VHF
@ o
UHF
Match the type of
connector on your
TV: A, B, or C.
For connector types
B and C, no UHF
connection is
required.
If you cannot connect your antenna cable to the VCR directly
If your antenna cable is a flat cable (300-ohm twin lead cable), attach an
external antenna connector (not supplied) so that you can connect the
cable to the VITF/UHF IN connector. If you have separafe cables for
VFIF and UFIF antennas, you may use a U/V band mixer (not supplied).
For details, see page
40.
12
Getting Started