Sony SLV-640HF - Manual (Page 24)

Playing a tape (continued)
Displaying the date and time, remaining tape length
and time counter
Press DISPLAY to turn, the display on or off.
24 Basic Operations
r
r s 1
_
SP
1
0 : 00 : 22 I-----
Data and time
Remaining tape length
The white bar represents the
approximate length of tape remaining.
Time counter
Displaying the remaining tape counter
Press COUNTER/REMAIN to display the remaining tape counter in the
display window. To display it on the TV screen, press DISPLAY to turn
the display on, then press COUNTER/REMAIN. Each time you press
COUNTER/REMAIN, the time counter and the remaining tape counter
appear alternately.
I u c
IH IO
When you use a tape with more than 2-hour recording, select
"~160" from the menu.
-120" or
1 Press MENU and select ADVANCED OPTIONS.
AUTO STEREO
DIMMER
AUDIO MIX
NORMAL AUDIO
GUIDE LAMP
TAPE SELECT
TOW
Notes
• When you insert a tape with
a short tape length such as T-
20, T-30 or a non-standard
commercially available tape,
the remaining tape length
may not be correct.
• The display will not appear
during still mode or slow-
motion playback.
Notes
• When a tape is reinserted,
the counter returns to
"OHOOMOOS."
• The counter will not work
on tape portions with no
recording.
2 Set TAPE SELECT to "~120" or "~160"
using the CURSOR ( ♦ / ■ ^ / b u t t o n s . AUTO ANT SEL
AUTO STEREO
DIMMER
AUDIO MIX
NORMAL AUDIO
GUIDE LAMP OFF
ON OFF
ON OFF
ON OFF
MAIN SAP
ON OFF
-120 -160
3 Press EXECUTE to store the setting.
Using the time counter
At the point on a tape that you want to find later, press COUNTER
RESET to reset the counter to "OHOOMOOS." When you rewind or
advance the tape to this point, refer to the counter.