When the timer settings overlap, Checking/changing/cancelling timer settings, Continued) – Sony SLV-640HF User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Checking/changing/cancelling
timer settings
(continued)
Case 1
Program 1 i--------
(listed first)
Program 2
_____
(listed next)
10:50
Will be cleared
11:30
Case 2
Program 1
20 seconds
will not be
recorded
10:00
Program 2
10:50
Case 3
Program 1
11:40
Will be cut off
10:00
Program 2
11:30
When the timer settings overlap
The VCR will not record overlapping programs. If any of your fimer
settings overlap, change the settings.
Case
1: If you preset two programs to start recording at the same
time...
The program listed first in the TIMER SET/CHECK menu has
priority over the other program. The timer setting of the lower
priority program will be erased from the TIMER SET /CHECK
menu when the first program begins recording.
Case
2: If you preset program 2 to start recording at the same time
you preset program 1 to finish recording...
The last 20 seconds of program 1 will not be recorded because
the VCR will enter recording pause for program 2 before
program 1 is finished.
Case
3: If you preset program 2 to start recording before program 1
is finished recording...
Program 2 will start recording before program 1 has finished.
10:45
12:00
34 Basic Operations