Aa/ hookup: vcr setup, Note – Sony SLV-640HF User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Audio/video (AA/) hookup
If your TV has audio/video (A/V) input jacks, you will get a better
picture and sound if you hook up your VCR using these connections. In
addition, for a true "home theater" experience, you should connect the
audio outputs of your VCR or TV to your stereo system. If your TV
doesn't have A/V inputs, see the following pages for antenna or cable
hookups.
If you're planning to use your VCR only to play back pictures and
movies, you're finished setting up the VCR after you've made these
connections. If you want to record off-air or off your cable TV system,
complete these connections first, and then go to the following pages for
antenna or cable hookups.
fit
(D
a
i
l/l
S'
s.
A Use this hookup if your TV has stereo jacks
B Use this hookup if your TV doesn't have stereo jacks
AA/ hookup: VCR setup
After you've connected your TV and completed antenna or cable hookup, use the following procedure to set up the
VCR.
Note
To play a tape in stereo, you must use the A/V connection.
Getting Started