See "to select tape speeds" on page, Press ■ stop, Basic operations 3 1 – Sony SLV-640HF User Manual
Page 31
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Press CURSOR then set the time
to stop recording in the same way.
DATE
START
STOP
CH
7/5
m
7:Q0AM
— SPl
Tips
• To set the channel, you can
also use CH +/- or number
buttons.
• To record a video source
from the LINE IN jacks,
press INPUT SELECT to
display "LINE" in the "CH"
position.
Tip
• To set the recording tape
speed, you can also use
TAPE SPEED.
Tip
• To change or correct a
setting before confirming it,
press CURSOR ^ to
highlight the item you want
to change and reset it.
Press CURSOR then press the
CURSOR (‘f/4^) buttons to select the
channel you want to record.
Only the channels preset in the VCR will
appear. When using a cable box, the cable
box channels appear.
Press CURSOR then press the
CURSOR (^/4^) buttons to select the
tape speed, SP or EP.
See "To select tape speeds" on page
27.
To confirm your program, press
CURSOR
All the settings stop being highhghted
and the cursor
(I)
appears in the leftmost
column.
To preset another timer setting, move the
cursor to the next line using CURSOR 4
and repeat steps
2
to
7.
8 After making the desired timer
settings, press EXECUTE.
Press POWER to turn off the VCR.
The TIMER indicator on the VCR hghts
up and the VCR stands by for recording.
When using a cable box, leave it on.
The VCR automatically turns on and
starts recording at the preset start time,
and turns off at the preset stop time.
To stop recording while recording
Press ■ STOP.
DATE
START STOP CH
I 7/5
m
7-.Q0AW 8:0QAM 6 SFj
-/-
DATE
START
STOP
CH
7/5 WED 7 : 00AM 8 : OOAW 6
-/ —
-/ —
START STOP CH
7/5 WED 7 :00AM 8:00AM
6 EP|
Basic Operations
3 1