Sony SLV-640HF - Manual (Page 22)

Using the ADVANCED
OPTIONS (continued)
Menu choices
Initial settings are indicated in bold letters.
Menu option Set this option to
AUTO ANT SEL • ON if your TV is connected only to VHP/
UHF OUT on the VCR. To play a tape, set
the TV to the VCR channel (channel 3 or 4).
• OFF if your TV is connected to both VHF/
UHF OUT and LINE OUT on the VCR.
To play a tape, set the TV to the VCR
input.
AUTO STEREO • ON to receive stereo programs.
• OFF to reduce noise in a stereo program.
Although the sound may improve, the
sound becomes monaural.
For details, see page 28.
DIMMER • ON to make the display window dim.
• OFF to make it brighter.
AUDIO MIX • ON to listen to the sound recorded on the
hi-fi audio track and the normal audio
track simultaneously. The AUDIO
MONITOR button becomes inoperative.
• OFF to select the sound using the AUDIO
MONITOR button.
For details, see page 25.
NORMAL AUDIO • MAIN to record the main sound on both
the hi-fi and normal audio tracks.
• SAP to record the SAP (Second Audio
Program) sound on the normal audio
track. The main sound is recorded on the
hi-fi audio track.
For details, see page 28.
GUIDE LAMP • ON to illuminate the borders of the dual
mode shuttle ring and the buttons on the
VCR which you can operate in the present
condition, telling you what you can do
with your VCR.
• OFF to turn them off.
TAPE SELECT • "-120" or "~160" to select the length of the
tape, allowing to display the remaining
tape length.
For details, see page 24.
22 Getting Started