Sony SLV-SE220B - Manual (Page 15)

Code numbers of controllable TVs
If more than one eode number is listed, try entering them one at a time until
you find the one that works with your TV.
To switeh to wide mode, see the footnotes below this table for the applieable
eode numbers.
Manufacturer Code number
Sony 01*‘, 02
Akai 68
Ferguson 52
Grundig 10* 1 , 11* 1
Hitaehi 24
JVC 33
Loewe 45
Mivar 09, 70
NEC 66
Nokia 15, 16, 69* 3
Manufacturer Code number
Panasonie
17*1, 49
Philips 06*‘, 07* 1 , 08* 1
Saba 12, 13
Samsung 22, 23
Sanyo 25
Sharp 29
Telefunken 36
Thomson 43* 2
Toshiba 38
Press
Press
*3
(wide) to switch the wide picture mode on or off.
(wide), then press 2 +/- to select the wide picture mode you want.
Pressé (wide). The menu appears on the TV screen. Then, press M/m/</,to
select the wide picture you want and press OK.
Tip
• When you set your TV’s eode number eorreetly while the TV is turned on, the TV
turns off automatieally.
Notes
• If you enter a new eode number, the eode number previously entered will be
erased.
• If the TV uses a different remote eontrol system from the one programmed to work
with the VCR, you eannot eontrol your TV with the remote eommander.
• When you replaee the batteries of the remote eommander, the eode number may
ehange. Set the appropriate eode number every time you replaee the batteries.
Setting up the remote commander 15