Sony SLV-SE220B - Manual (Page 45)

To set the clock
^ Hold down0 PROG so that “DAY” appears in the display window.
However, if the eloek has already been set, the eurrent setting appears.
2 Turn© PROG to set the day.
2 Press© PROG.
“MONTH” appears in the display window.
^ Turn and press© PROG to set the month, and then the year.
After you set the year, “CLOCK” appears in the display window again.
^ Turn and press© PROG to set the hour and minute.
0 When you have finished setting the time, press© PROG to start the
eloek.
Tips
• To eaneel a Dial Timer setting, press X (stop) on the VCR while you are making
the setting.
• The programme is reeorded in the eurrent tape speed mode. To ehange the tape
speed, press SP/LP before you eomplete the setting in step 9.
• To eheek, ehange, or eaneel the programme setting, see “Cheeking/ehanging/
eaneelling timer settings” on page 57.
Notes
• If eight programmes have already been set using the ShowView system or the
MINUTERIE menu, “FULL” appears in the display window for about five
seeonds.
• The© indieator flashes in the display window when you eomplete the setting in
step 9 with no tape inserted.
• If you set the eloek using the Auto Cloek Set funetion and HORLOGE AUTO is
set to OUI, the eloek will adjust itself to the ineoming time signal regardless of
adjustments made with the Dial Timer. Be sure you have set the Auto Cloek Set
eorreetly.
• When the time is set ineorreetly, “ERROR” appears in the display window in step
9. Set the timer again fTom step 1.
• You eannot set the tape speed to AUTO using the Dial Timer. To seleet AUTO, set
the tape speed in the MINUTERIE menu (see page 57).
00
a>
< n
O
T3
(D
o
3
< n
continued-
Recording TV programmes using the Diai Timer (SLV-SE820B oniy) 45