Sony SLV-SE220B - Manual (Page 50)

In step 4 above, press m to seleet AUTO. When you are reeording a
programme in the SP mode and the remaining tape length beeomes shorter
than the reeording time, the reeording tape speed is automatieally ehanged to
the LP mode. Note that some noise will appear on the pieture when the tape
speed is ehanged. To operate this funetion eorreetly, the
“SÉLECT.CASSETTE” setting in the RÉGLAGES UTILISATEUR menu
must be aeeurate (see page 66).
Tips
• To set the line input video source, you can also use the CHOIX ENTREE button.
• You ean set the extended time for the ShowView setting by 10, 20, 30, 40, 50, or 60
minutes. Set ÉTENDRE SHOWVIEW in the FONCTIONS AVANCÉES menu to
the desired extended time on page 67.
• To eheek, ehange, or eaneel the programme setting, see “Cheeking/ehangingZ
eaneelling timer settings” on page 57.
Notes
• If the VPS/PDC signal is too weak or the broadeasting station failed to transmit
VPS/PDC signals, the VCR will start reeording at the set time without using the
VPS/PDC funetion.
• T h e © a n d © U indieators flash in the display window when you press 1/1 with
no tape inserted.
• When you set OPTIONS PROG. to NORMALE in the FONCTIONS AVANCÉES
menu, the SHOWVIEW menu does not appear on the TV sereen. Seleet
SHOWVIEW or MIXTE. •
• not available on SLV-SE220B
To use the Auto Tape Speed function*
50 Recording TV programmes using the ShowView® system (not avaiiabie on SLV-SE620B)