Notes – Sony SLV-SE220B User Manual
Page 69
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Example C
TV
Your VCR (Recorder)
^: Signal flow
m
a
3
(fi
How to connect to a stereo system (SLV-SE820B only)
Connect the t LIGNE-2 Go D jacks on this VCR to the audio outputjacks
on the stereo system, using the RK-C510HG audio cable (not supplied).
Notes
• Make sure you connect the plugs to jacks of the same colour.
• If the other VCR is a monaural type, leave the red plugs unconnected.
• If you connect this VCR to both the ENTREE LIGNE and SORTIE LIGNEJacks
of the other VCR, select the input correctly to prevent a humming noise.
• If the other VCR does not have a PERITEL connector, use the VMC-2106HG
cable instead and connect the cable to the line outjacks of the other VCR.
• When you connect another VCR to the LIGNE-3 (DEC/EXT)*
1
or LIGNE-2
(DEC/EXT)*
2
connector, press CHOIX ENTREE to display “L3”*
1
or “L2”*
2
in
the display window.
*
1
SLV-SE820B only
*
2
SLV-SE720B, SE620B and SE220B only
Connecting to a VCR or stereo system 09