Sony SLV-SE220B User Manual

Page 74

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Symptom

Remedy

The SHOWVIEW menu
or the MINUTERIE

menu does not appear.

• Check that OPTIONS PROG, in the FONCTIONS

AVANCÉES menu is set correctly (see page 67),

The VPS/PDC function
does not operate

properly.

• Check that the clock and the date are set correctly.
• Check that the VPS/PDC time you set is the correct one

(there might he a mistake in the TV programme guide). If

the hroadcast you wanted to record did not send the good
VPS/PDC information, the VCR will not start recording.

• If the reception is poor, the VPS/PDC signal might he

altered and the VCR might not start recording.

You cannot watch Canal

Plus programmes when

the VCR is in standby
mode.

• Check that DEC is set to OUI for this channel in the LISTE

STATIONS TV menu.

• Make sure the Canal Plus PERITEL cahle is plugged

securely.

A Canal Plus programme

is always recorded

scrambled.

• Make sure the Canal Plus PERITEL cahle is plugged

securely.

• Check that DEC is set to OUI for this channel in the LISTE

STATIONS TV menu.

A tape cannot be

inserted.

• Check that a tape is not already in the tape compartment.

The remote commander
does not function.

• Make sure you are pointing the remote commander at the

remote sensor on the VCR.

• Replace all the hatteries in the remote commander with

new ones if they are weak.

• Make sure the

|TV|

/

|

magn

|

remote control switch is set

correctly.

The selected input line
connector number does

not appear in the display
window.

• Press CHOIX ENTREE to display the connected line.

The tracking meter does

not appear on the TV

screen.

• The recording condition of the tape is very poor and

tracking cannot he adjusted.

You cannot control other

TVs.

• Set your TV’s code numher. The code numher may change

when you replace the hatteries of the remote commander.

The display window

becomes dim.

• The display window automatically hecomes dim when the

VCR is in standhy or timer recording mode.

The VCR needs to be
cleaned.

• Clean the cahinet, panel and controls with a dry, soi^ cloth,

or a soi^ cloth slightly moistened with a mild detergent

solution. Do not use any type of solvent, such as alcohol or

henzine.

74 Troubleshooting

Advertising