To return to the previous step, To stop recording, To use the vcr after setting the timer – Sony SLV-SE220B User Manual
Page 44: C timer indicator (44)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
The programme position or LIGNE input appears in the display
window.
0PROG Press0 PROG.
AAA
'^MAGN /
/
^ /
/ / ►
▼ y ▼
8
Turn © PROG to set the programme position.
*^MAGN /__ /
~ l
S P _/ 1
1
cHoix ENTREE To reoord from a deeoder or other souree eonneeted to one or more
Q
of the LIGNE inputs, turn© PROG or press CHOIX ENTREE to
display the eonneeted line in the display window.
0
PROG
Press© PROG to eomplete the setting.
“OK” appears in the display window for about five seeonds.
T h e © indieator appears in the display window and the VCR stands
by for reeording.
To reeord from a deeoder or other souree, leave the eonneeted
equipment switehed on.
To return to the previous step
To return to the previous step, press the CHAINE + and - buttons on the
VCR at the same time during any of the Dial Timer settings.
To stop recording
To stop the VCR while reeording, press ■ (stop).
To use the VCR after setting the timer
To use the VCRbefore areeordingbegins,justpress 1/1. The ® indieator
turns off and the VCR switehes on. Remember to press 1/1 to reset the VCR
to reeording standby after using the VCR.
You ean also do the following tasks while the VCR is reeording:
• Reset the eounter (page 37).
• Display tape information on the TV sereen (page 39).
• Cheek the timer settings (page 57).
• Wateh another TV programme (page 39).
44 Recording TV programmes using the Diai Timer (SLV-SE820B oniy)