Before you starts, To extend the duration, To cancel the duration – Sony SLV-SE220B User Manual
Page 56: To stop recording, Note, Setting the recording duration time, Ij - j i j, I ij - j ij
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the recording duration time
After you have started recording in the normal way, you can have the VCR stop
recording automatically after a specified duration.
Before you starts
• Refer to “Index to parts and controls” for button locations.
^ While recording, press Z ENR.
T h e © indicator appears in the display window.
OD
©I
MAGN
's P
n •“//“/
IJ - J I J
CTO
VIDEO
_
n-
J
n
®
I IJ - J IJ
""
2 Press ENR repeatedly to set the duration time.
In SP mode
Each press advances the time in increments of 30 minutes.
0:3^ —► 1:00---------► 4:0^
4:3
^ Normal recording
In LP mode
Each press advances the time as shown below.
■ 0:3^ —► 1:00-------- ► 8:0^
9:0
^
Normal recording
J
The tape counter decreases minute by minute to 0:00, then the VCR stops
recording and turns off automatically.
To extend the duration
Press ENR repeatedly to set a new duration time.
To cancel the duration
Press ENR repeatedly until t h e © indicator disappears and the VCR
returns to the normal recording mode.
To stop recording
To stop the VCR while recording, press ■ (stop).
Note
• You cannot display the current tape time in the display window when setting the
recording duration time.
56 Setting the recording duration time