Sony IJP-V100 - Manual (Page 20)

C'oniiiuic with Slop 7, ''Install the Soltwaic - Rl-.Ql'lRl'l’)'"
Shared line with an external modem (Case ADCI)
11 in Step 2 you coni'iected tlie Sony IJP-V100 to a shared plione line
(reeeives hoth \ oiee and tax ealls) that also has an extertial modem
contieeted to it, theti use this conneetion diaeratii.
Phone optional,
but recommended External
modem Telephone
wall jack
Connect your external modem to the Sony IJP-VIOO. Find the
phone cord that goes from the back of your external modem to a
wall jack. Disconnect the cord from the wall jack and plug it into
either of the two ports on the back of the Sony IJP-VIOO labelled.
“To Phone, Answering Machine, or Modem.”
Important: If your external modem’s software is set to automati­
cally receive faxes to your computer, turn off that setting; if you
don’t, your Sony IJP-VIOO will not be able to receive faxes prop­
erly.
Connect your phone to the Sony IJP-VIOO. Connect the cord
from your phone to either of the two ports on the back of the Sony
IJP-VIOO labelled, “To Phone, Answering Machine, or Modem.”
The main benefits of connecting a phone in this situation are 1)
For the convenience of having a phone close to the Sony IJP-V 100
so that you can reach the START button when you receive faxes
manually, and 2) In case you need to send a fax (press START)
while having a conversation with someone who must receive their
faxes manually.
Because you don’t have an answering machine or computer voice-
mail on this phone line, you’ll need to
receive faxes manually;
the Sony IJP-VIOO will NOT answer incoming calls automati­
cally.
To receive a fax manually: When the phone rings, pick it up
and listen for fax tones; if you hear fax tones, press the START but­
ton on the Sony IJP-VIOO, then hang up the phone.
Refer to “Man­
ually Receiving Faxes” in Chapter 3 for more information.
Continue with Step 7, “Install the Software - REQUIRED!”
1-14