Sony IJP-V100 - Manual (Page 26)

COniuct voiir answering machiiu' to tlu* Sonv 100. Plii>:
the phone line I’uim \ oiir answenne maehine to eittier of the por ts
on the baek oitlie Son\ l.lP-\'100 labelleJ, " To Phone. .Answenne
Maehine. or Modcni.''
lm|)oi1aiit: Set your answeritig maeliine to atiswer calls alter 4 or
lew er rings, and make sure yoitr outgoing greeting tncssage is no
longer than .40 seconds. If you don't, you tnay not receive faxes
properly.
Connect your phone to your answering machine. If your
answering machine doesn't have an attached phone handset, con­
nect the cord from your phone to the back of your answering
tiiachine.
The main benehts of connecting a phone in this situation are I) In
case you tieed to send a fax (press START) u hile having a conver-
satioti with sotneone who tnust recei\e their faxes mttnually, and
2) For the convenience of having a phone close by to make and
receive voice calls.
After you install the software in Step 7, and answer the Setup
Wizard questions for this connection case, here's how you'll auto­
matically receive faxes with the Sony
UP- V100: Your answering
machine will pick up the call after the number of rings you've set,
then the Sony IJP-V100 will "listen" while the answering machine
plays its greeting. If the Sony l|P-V100 detects fax tones, it will cut
off the answering machine and receive the fax. If you don't con­
nect your answering machine directly to the Sony IJP-V100 as
described here, you may not receive your faxes properly.
Continue with Step 7, “Install the Software - REQUIRED!”
Shared line with external modem and
computer voicemail (Case ADFI)
If in Step 2 you connected the Sony IJP-'VlOO to a shared phone line
(receives both voice and fax calls) that also has an external modem
connected to it and computer voicemail to answer voice calls, then
use this connection diagram.