Loading plain and special papers, Loading letterhead paper, Loading the single-envelope slot – Sony IJP-V100 User Manual
Page 87
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
For more detail on paper-tray loading, refer to the step-by-step, illus
trated instructions in Chapter 1, “Step 5. Load the Paper Supply.”
Loading plain and special papers
• Refer to the following maximums when loading paper:
Plairr paper (20-lb bond)
Sony Premium InkJet Paper
Sony Photo Paper
Sony Greeting Card Paper
Avery paper labels
Card stock
Up to 150 sheets
Up to 100 sheets
Up to 50 sheets
Up to 50 sheets
Up to 25 sheets
Up to 50 sheets
• Load sheets of the above-listed
The print side paper with the print side facing
of the paper toward you.
should face you Sony Premium InkJet Paper:
during loading.
The
side has
no
comer arrow.
Sony Photo Paper;
Load with the glossy side facing you.
Avery paper labels;
Load with the labels facing you.
The legal extension
piece supports
extra-long paper.
• Before loading legal-size paper,
or other extra-long paper, be sure
to pull up the legal extension
piece at the back of the paper
tray. Note: If it’s difficult to
extend the legal extension piece,
hold the side of the tray with one
hand, and pull up on the exten
sion piece with the other hand.
Loading letterhead paper
• Load letterhead paper with
the letterhead-edge down
Load the
letterhead-edge
facing toward you
down and
facing toward
you.
Loading the single-envelope slot
• To print on a single envelope, it’s most convenient to use the single
envelope slot, so you don’t have to remove any paper you already
have loaded in the paper tray.