Setting up the tv, dtv receiver, and stand – Sony KW-34HD1 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installing the DTV System
Setting Up the TV, DTV Receiver, and Stand
The DTV stand is shipped fully assembled. Follow these instructions to set up
the TV and DTV receiver.
The use of the Sony stand supplied with this DTV system is recommended
to enstue the safety, easy placement, proper operation, and optimal
performance of this product. In the event you decide not to use the stand,
Sony recommends the following guidelines:
□ The DTV receiver must be placed underneath the TV while
maintaining a distance of 12 inches between the top of the DTV
receiver and the bottom of the TV.
□
The cable must be properly routed as to avoid any damage.
□
Staples or hold-down devices, which could pierce the cable, should
not be used.
□
Proper ventilation of the TV and receiver must be provided.
□
Other electronic components should be placed at a minimiun of 12
inches to avoid any interference.
Place the TV on the
Stand
1
Carefully filt fhe TV forward imtil fhe botfom ledge of the TV slides under
the foot cover. The TV should be flush against the foot cover on the stand.
2
Place the TV on the guides on the top of the stand. Make sure that the feet
on the TV fit into the guides on the stand.
Guides
Foot cover