Sony KW-34HD1 - Manual (Page 60)

other Information
Troubleshooting
No picture
(screen not lit), no
sound
U If your TV does not turn on, and a red light keeps flashing, your TV may
need service. Call your local Sony Service Center.
□ Make sure the power cord is plugged in.
□ Check to see if the TV /VIDEO setting is correct: when watching TV, set to
TV, and when watching video tapes, set to VIDEO 1, 2, or 3.
□ Try another channel. It could be station trouble.
□ Push the power button on the front of the monitor.
Remote control does
not operate □ Batteries could be weak. Replace the batteries.
□ Press TV (FUNCTION) when operating your TV.
□ Make sure the DTV's power cord is connected securely to the wall outlet.
□ Locate the DTV at least 3-4 feet away from fluorescent lights.
□ Check the orientation of the batteries.
Dark, poor or no
picture (screen lit),
good sound
□ Adjust the Picture setting in the Video menu (see page 43).
□ Adjust the Brightness setting in the Video menu (see page 43).
□ Check antenna/cable connections.
Good picture, no sound □ Press MU PNG so that "MUTING" disappears from the screen (see page 54).
□ Check the MTS setting in the Audio menu (see page 45).
□ Make sure Speaker is set to On in the Audio menu (see page 45).
Cannot receive upper
channels (UHF) when
using an antenna □ Use Auto Program in the Channel Setup menu to add receivable charmels
that are not presently in DTV memory (see page 47).
No color □ Adjust the Color settings in the Video menu (see page 43).
Only snow and noise
appear on the screen
□ Check the antenna/cable connections.
□ Make sure the channel is broadcasting programs.
□ Press ANT to change the input mode (see page 55).
Dotted lines or stripes □ Adjust the antenna.
□ Move the DTV away from noise sources such as cars, neon signs, or hair­
dryers.