Setting up overview – Sony KW-34HD1 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Introducing the DTV System
Setting Up Overview
Here is an overview of the steps required to set up your DTV system. Detailed
illustrations are included on the pages shown below.
To
1
Place the TV and DTV receiver on the stand.
2
Connect an antenna to the DTV receiver's FROM
ANTENNA jack. Connect the I/O cable to the DTV
receiver's I/O jack. Then route the cable through the stand
and connect it to the TV's I/O jack.
See
Page(s)
17
19 to 21
3
Connect the TV's AC cord to the DTV receiver's AC outlet. 19
4
Connect other audio and video equipment you have, such 24 to 34
as cable boxes, VCRs, etc. Then connect the DTV receiver's
AC power cord to a wall outlet.
5
Turn on the TV to display the Auto Setup screen, which 47
enables you to run Auto Program. Auto Program sets up the
TV to receive channels for each iirput source, including
cable, VHF/UHF, and digital.