Sony MHC-RXD3 - Manual (Page 12)

Recording a CD
— CD Synchro Recording
The CD SYNC button lets you record from a
CD to a tape easily. You can use a TYPE I
(normal) tape.
1
Press = and insert a blank tape into
deck B.
With the side
you want to
record facing
forward
Press A OPEN/CLOSE and place a
CD.
Then press again to close the disc tray.
If the disc number you want to record is
not displayed, press DISC SKIP/EX-
CHANGE repeatedly so that it appears.
With the label
side up. When
you play a single
CD, place it on
the inner circle
of the tray.
3 Press CD SYNC.
Deck B stands by for recording and the
CD player stands by for playback. The
indicator on TAPE B ► (for front side)
lights up.
4
Press DIRECTION repeatedly to
select to record on one side.
Select (or RELAY) to record on
both sides.
5
Press PAUSE.
Recording starts.
To stop recording
Press ■.
Tips
• If you want to record from the reverse side, press
TAPE B to light its indicator after pressing
CD SYNC in step 3.
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
Note
You cannot listen to other sources while recording.
12