Press edit once so that "edit" flashes, Place a cd on the disc tray, Note – Sony MHC-RXD3 User Manual
Page 24: Selecting tape length automatically
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Recording CDs by specifying the
track order (continued)
Selecting tape length
automatically
— Tape Seiect Edit
Press EDIT once so that "EDIT"
flashes.
The required tape length for the
currently selected CD appears, followed
by the total pla
5dng time for sides A and
B respectively.
You can check the most suitable tape length
for recording a CD. Note that you cannot use
Tape Select Edit for discs containing over 20
tracks.
DISC SKIP/
•%
EX-CHANGE
Z
24
n
^
1:----- il ..... t 1 rr
/-!-
i a
o
0
/
-, ' \ 0 O O
Place a CD on the disc tray.
If the disc number you want to record is
not displayed, press DISC SKIP/ ,
EX-CHANGE repeatedly so that it
appears.
Note
You cannot use this function after programming.
In order to use this function, you must first erase the
program (see “Clear the entire program" in the table
on page 21).
2
Press FUNCTION repeatedly until
"CD" appears in the display.