Sony MHC-RXD3 - Manual (Page 29)

"ON" appears and the hour digits flash
in the display.
4
Press ENTER/NEXT.
5
Set the time to start recording.
Press or repeatedly to set the
hour, then press ENTER/NEXT.
The minute indication starts flashing.
Press or repeatedly to set the
minute, then press ENTER/NEXT.
"OFF" appears and the hour indication
flashes again.
6
Set the time to stop recording
following the above procedure.
The type of timer ("REC") appears,
followed by the start time, the stop time
and the preset station number, then the
original display appears.
7
Press = and insert a blank tape into
deck B.
8
Turn off the system.
When the recording starts, the volume
level is set to the minimum.
Press TIMER SELECT and press or
to select 'TUNER REC", then press
ENTER/NEXT.
To change the setting, start over from step 1.
To cancel the timer operation
Press TIMER SELECT and press or
to select "TIMER OFF", then press
ENTER/NEXT.
Notes
• If the system is on at the preset time, the recording
will not be made.
• You cannot set the timer if the timer on and off
times are the same.
• When you set the Sleep Timer, the Timer­
recording will not turn on the system until the
Sleep Timer turns it off.
• You cannot activate the Timer-recordirig and
Daily Timer at the same time.
To check the setting
29