Step3: presetting radio stations, 3 press tuner memory, 4 press enter/next – Sony MHC-RXD3 User Manual
Page 7: 5 repeat steps 1 to 4 to store other stations, To tune in a station with a weak signal, To set another station to the exist preset number, Step 3: presetting radio stations
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Step3: Presetting
radio stations
You can preset up to 30 stations, 20 for FM
and 10 for AM.
I/C!)
(power)
2
2
1
1
Press TUNER/BAND repeatedly
until the band you want appears in
the display.
Every time you press this button, the
band changes as follows:
FM ► AM
2
Press and hold - or + until the
frequency indication starts to change
automatically, then release it.
Scanning stops when the system tunes in
a station. "TUNED" and "STEREO" (for
a stereo program) appear.
n I ~l I
J I I I
3
Press TUNER MEMORY.
A preset number flashes in the display.
F-r, ill-
-----------------------------
Y
Preset number
4
Press ENTER/NEXT.
The station is stored.
5
Repeat steps 1 to 4 to store other
stations.
To tune in a station with a weak
signal
When the desired station is skipped during
automatic tuning, press - or + repeatedly in
step 2 to tune in die station manually.
To set another station to the exist
preset number
Start over from step 1. After step 3, press 1«
or repeatedly to select the preset number
you want to store the station.
continued