To stop recording, Tips, Playing a tape – Sony MHC-RXD3 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3
Press = and insert a blank tape into
deck B.
Deck B stands by for recording.
The indicator on TAPE B ►- (for front
side) lights up.
5
Press DIRECTION repeatedly to
select to record on one side.
Select (or RELAY) to record on
both sides.
6
Press PAUSE.
Recording starts.
To stop recording
Press ■.
Tips
• If you want to record from the reverse side, press
TAPE B to light its indicator after pressing
REC in step 4.
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• To record non-preset stations, use - and +
►► on the remote) in step 2 to tune in the desired
station.
• If noise is heard while recording from the radio,
move the respective antenna to reduce the noise.
Playing a tape
You can use a TYPE 1 (normal) tape. To select
either deck A or B, press DECK A ►- or
DECK B ► on the remote.
3
-II
(power)
■ VOL +/-
A
0
1
o
3
continued
iS