Canon EOS A2E User Manual

Page 109

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

CF9:

Fixes the shutter speed at 1 /200 sec

when using flash.

When shooting indoors with flash in aperture-priority AE

mode, the camera is likely to set a slow shutter speed which

can result in blur caused by camera shake This custom func­
tion prevents this from happening by fixing the shutter speed

at 1 /200 sec regardless of the lighting conditions

CF10:

Prohibits superimposed AF frames in

the viewfinder

When a subject is focused, the AF frame used for focusing nor­

mally lights red in the viewfinder Setting this custom function

stops this from happening.

CF11

Adds a depth-of-field check function to
the AE lock button.

Setting this function lets you use the AE lock button to check
the depth of field after the subject is focused and exposure is
set
This custom function cannot be used together with CF4

CF12:

Enables

shooting

with

the

mirror

locked up

When the shutter button is pressed completely in self-timer

mode, the mirror moves up immediately and the picture is

taken two seconds later

CF13:

Cancels the metering timer function

• Except in DEP mode.

Setting this function cancels the timer which continues meter­
ing for six seconds after your finger is removed from the shut­
ter button, thus saving battery power.

CF14:

Changes the sync timing ofthe built-in

flash from first curtain sync to second
curtain sync.

Flash firing synchronizes with the travel of the second shutter

curtain, providing a more natural effect when using slow shut­
ter speeds

CF15:

Links spot metering to the selected AF

frame (only when the AF frame is se­

lected by the user).

Setting this function lets you carry out spot metering at the
same point as the selected AF frame, eliminating the need to
change the scene composition during metering.

CF16:

Cancels

automatic

flash

reduction

control.

Setting this function cancels the automatic flash reduction

control which normally operates with backlit subjects, thus

preventing the underexposure which can occur with subjects
backlit by a strong light source such as the afternoon sun.

60

If both CF4 and CF6 are set. only CF4 is used • If both CF4 and CF11 are set, only CF4 is used.

Custom function settings operate only in creative zone shooting mode.

Advertising